EN

historical lantern for spacious pedestrian zones, wide streets, large squares

Miracle Praha 6S

The Miracle Praha 6S lantern is intended for lighting spacious pedestrian zones, wide roads and historic squares. It imitates a large lantern from the end of the 19th century. The maximum light output of up to 14,000lm is provided by 6 LED modules with a color temperature of 1,800K. Each of the modules can be remotely controlled and its intensity continuously regulated until it goes out. A powerful LED (COB, 2,200lm) with variable Tc from 1,800K to 4,000K is installed in the central part. Even this light source can be remotely controlled for intensity and color. Alternatively, the direction of the light can be adjusted with suitable lenses in order not to shine on the facade of the house or to direct the light flow onto the road. The side panels are made of Plexiglas. They can therefore be colored or engraved with suitable motifs, which creates interesting effects.
more information

Historical lamp

usage

P4 to M2

lighting class

historic squares, pedestrian zones and wide streets

type of lighting

Miracle Praha 6S

Features

mechanical design
Design
historic 6-sided lantern from the end of the 19th century
Dimensions
540 x 1040 mm
Material
steel structure with canopy decorated with cast iron, powder coating, PMMA side panels
Paint color
according to customer specification
Opening
side door or canopy opening
Holding
to the pole or boom, screws
Mechanical resistance of PMMA
IK08, the advantage is non-shattering
Degree of protection
IP53
Weight
25 kg
light source
LED modules 1K8
1,800 K, 0 to 144 W / 14,000 lm (remote controlled)
Central COB
1,800 K to 4,000 K, 0 to 32 W / 2,200 lm (remote controlled)
Optional
RGB instead of COB, 0 to 24W (remote controlled)
Color Rendering
>70
ULOR
0%
Power
0 to 180 W
optics
Cover
thickness 3 mm, cast acrylic PMMA, sandblasted or clear
COB light direction
selectable radiation combination: IES I to V / spot 45°, 60°, 90°, 120°
Direction of light 1K8
standard without optics - 120°, optionally each module can have its own IES I, II or III lenses
Assembly
replaceable by user as needed
Identification
in the AnyCity system

Miracle Praha 6S

Design

The basic structure of the lantern is made of sheet steel. The decorations are cast from gray cast iron. Final color design according to customer requirements. The side panels are made of PMMA material (plexiglass), which can be either clear, sandblasted or colored tinted (e.g. smoke to shield the facade). Plexiglas also allows the engraving of various motifs, which creates interesting glowing ornaments in the light of a lantern at night. The basic light surface of the LED modules is hidden behind sandblasted plexiglass, which softens the light and creates a pleasant all-surface effect. It is possible to attach optics (lenses) to the modules, which will direct the light flow to the required places. The central COB is covered with a large silicone lens for further light direction.
Assembly and disassembly of the main parts is easy. The construction of the light part is designed so that it is possible to easily modernize existing old lanterns with a light bulb or discharge lamp. The lamp is powered by a 48 V DC voltage source, which is located at the base of the column or electrical box on the facade. Either a CAT6 cable or a traditional CYKY 3x1.5mm cable is used to connect the lamp and the source.

Miracle Praha 6S

Function

It is possible to remotely control the light flux intensity of each of the 6 LED modules in the range of 0 to 100%. After installation, the parameters can be easily adjusted individually in each light location.
For the central COB, it is also possible to change the replacement chromaticity temperature in the range of 1,800 K to 4,000 K and adjust its operation according to the season, holidays or other local requirements.
Optical lenses are replaceable at each position as needed, while it is possible to choose from IES type I to V characteristics. The final combination of lenses for the given location is stored in the AnyCity system.
Instead of a central COB, the lantern can be equipped with a group of full-color RGB LEDs, which then create the desired atmosphere or create a tourist-interesting show.

Miracle Praha 6S

Certificate

The lamp has been certified byOrcave
This means that its design allows you to adjust the light parameters of the lamp remotely using an application. Parameters such as replacement chromaticity temperature, luminous flux intensity or emission characteristics can be adapted to the real situation. For example, an increase in road traffic, a change in the layout of public space, etc.
© ORCAVE